Embedded Files
- Kibria, B. M. G., Ahmed, F., Ahsan, R. and Ansary, M. A. (2019), “Experimental investigation on behavior of reinforced concrete interior beam column joints retrofitted with fiber reinforced polymers,” Asian Journal of Civil Engineering – Building and Housing, Springer, DOI 10.1007/s42107-019-00204-3.
- Rahman, A. R. and Ahsan, R. (2019), “Evaluation of Design Parameters of Near Embankment Underground Tunnel Structure by Numerical Analysis of a 2D Plain Strain Model,” Advances in Numerical Methods in Geotechnical Engineering, Ed. Shehata, H. F. and Desai, C. S, Sustainable Civil Infrastructures, Springer, pp. 182-198.
- Ahsan, R., Asif, M. M. and Alam, M. Z. (2018), “Performance analysis of ferrocement retrofitted masonry wall units under cyclic loading,” World Academy of Science, Engineering and Technology International Journal of Civil and Environmental Engineering, Vol:12, No:10, pp. 1028-1033.
- Khan, M. R. N., Ahmed, F., and Ahsan, R. (2018), “Ambient Vibrations of Unreinforced Masonry Buildings in Dhaka City,” Masonry 2018, ASTM STP1612, N. V. Krogstad and W. M. McGinley, Eds., ASTM International, West Conshohocken, PA, 2018, pp. 34–55, http://dx.doi.org/ 10.1520/STP161220170150.
- Ahsan, R. and Zahura, F. (2017), “Numerical study on effect of integrity reinforcement on punching shear of flat plate,” Computers and Concrete, Techno-press, Vol. 20, No. 6.
- Ahmed, F. and Ahsan, R. (2017), “Damage identification of RC beams from changes in their vibration characteristics,” Structural Health Monitoring 2017, Real Time Material State Awareness and Data Driven Safety Assurance, Ed. Chang, F. and Kopsaftopoulos, F., DEStech Publications Inc.
- Zahura, F. and Ahsan, R. (2016), “Numerical Simulation of Punching Shear of Flat Plates with Low Reinforcement,” World Academy of Science, Engineering and Technology International Journal of Civil and Environmental Engineering, Vol:10, No:7, pp. 904-907.
- Rahman, M. S., Begum, M. and Ahsan, R. (2015), "Finite Element Analysis of Fully Encased Composite Columns," International Journal of Advances in Civil Engineering and Technology., MANTECH Publications pvt ltd.
- Islam, N., Rana, S., Ahsan, R. and Ghani, S.N. (2014), “An Optimized Design of Network Arch Bridge Using Global Optimization Algorithm,” Advances in Structural Engineering, ASCE, Vol. 17(1), pp. 197-210.
- Rana, S., Islam, N., Ahsan, R. and Ghani, S.N. (2013), “Application of Evolutionary Operation to the Minimum Cost Design of Continuous Prestressed Concrete Bridge Structure.” Engineering Structures, Elsevier, Vol. 46, pp. 38-48.
- Ahsan, R., Rana, S. and Ghani, S.N. (2012), “Cost optimum design of post-tensioned I-girder bridges using global optimization algorithm.” The Journal of Structural Engineering, American Society of Civil Engineers, Vol. 138 (2), pp. 273-284.
- Al-Amin, S. and Ahsan, R. (2012), “Finite Element Modeling of Reinforced Concrete Column under Monotonic Lateral Loads,” International Journal of Computer Applications, Vol. 42, No. 3, pp. 53-58.
- Rashed, G., Ahsan, R. and Chowdhury, S. R. (2012), “Numerical Modelling of Concrete Tensile Strength Test by Wrapping Scripting Language with Compiled Library,” International Journal of Computer Applications, Vol. 40, No. 14, pp. 34-38.
- Ahmed, M., Islam M. S. and Ahsan, R. (2012), “Dynamic Stiffness of Laterally Loaded Pile Foundation in Dhaka Soil,” Electronic Journal of Geotechnical Engineering, Vol. 17, pp. 2375-2397.
- Shurovi, S. S. and Ahsan, R. (2012), “Non-Linear Time-History Analysis of 2D RC Frame with Masonry Infill,” The AIUB Journal of Science and Engineering (AJSE), Vol. 11(1), pp. 15-22.
- Ahsan, R., Ansary, M.A., Al-Hussaini, T.M. and Rahman, S.Z. (2007), “Assessment of dynamic behaviour of Jamuna multi-purpose bridge through noise study,” Bridge Design, Construction and Maintenance, ed. Lark, R., Institution of Civil Engineers, UK, Tellford publications, pp. 143 -152.
- Ahsan, R., Ahmed, I. and Ahmed, B. (2003), “Lateral drift of semi-rigid steel frames – I,” Journal of Civil Engineering, the Institution of Engineers, Bangladesh, Vol. CE 31, No. 2, 177-189.
- Ahsan, R., Ahmed, I. and Ahmed, B. (2003), “Lateral drift of semi-rigid steel frames – II,” Journal of Civil Engineering, the Institution of Engineers, Bangladesh, Vol. CE 31, No. 2, 191-203.
- Saleh, N.B. and Ahsan, R. (2003), “Tuned Mass Damper (TMD): A structural control device for earthquake-threatened structures,” Technical bulletin published by Department of Civil and Environmental Engineering, University of Asia Pacific.
- Konagai, K. and Ahsan, R. (2002), “Simulation of nonlinear soil-structure interaction on a shaking table,” Journal of Earthquake Engineering, Imperial College Press, Vol. 6, No. 1, 31-51.
- Ahsan, R. and Konagai, K. (2000), “Simulation in shaking table tests of soil-structure interaction,” Proceedings of Railway Mechanics, JSCE, No. 4, 55-60.
- Konagai, K., Ahsan, R. and Maruyama, D. (2000), “Simple expression of dynamic stiffness in grouped piles in sway motion,” Journal of Earthquake Engineering, Imperial College Press, Vol. 4, No. 3, 355-376.
- Konagai, K., Mikami, A., Katagiri, T., Ahsan, R. and Maruyama, D. (1999), “Report of the damage caused by Mid-North Iwate earthquake of September 3, 1998,” Bulletin of Earthquake Resistant Structure Research Center, IIS, Tokyo Univeristy, No. 32, 3-16.
- Ahsan, R. and Ahmed, I. (1997), “Effect of transverse shear deformation in beams,” Journal of the Institution of Engineers (India), Vol. 77, 228-232.
Page updated
Google Sites
Report abuse